Ilve Oven Door Hinge Replacement: Things To Know Before You Get Your Oven Repaired

0
30
oven repair Sydney

The luxury food appliance brand Ilve is the gold standard when it comes to ovens. When we talk of ovens, the brand Ilve comes first to mind. It produces some robust ovens that last for a long time. But even an extraordinary oven brand like Ilve is not immune to wear and tear. Just like other appliances, it is bound for occasional repairs and replacements. Especially the door hinges. With continuous and repeated use, you may need an Ilve oven door hinge replacement sooner than you think.

Facing trouble opening and closing your oven door recently? It is a signal for your oven repair Sydney. Let’s dive straight into the intricacies of the hinge replacement process. Let’s understand why oven door hinges need replacement in the first place; how they are replaced; and what’s the cost involved.

Why do oven hinges need replacement?

The need for an Ilve oven door hinge replacement could  arise due to the following reasons:

1. Normal wear and tear over time:

Door hinges experience wear and tear as time passes by. If you pull the door hard enough by mistake or if your cat jumps on the oven door every time it’s open, they are bound to snap!

2. Hinge loosens from repeated opening/closing of door:

With repeated opening and closing motions, hinges come loose. And if you have restless children running around the kitchen, God save the oven!

3. Corrosion from exposure to heat, steam, and grease:

The hinges tend to get ruined due to the constant exposure to heat and steam. They face the risk of corrosion during regular meal preparations. It’ll wreak havoc if the hinges are not cleaned every once in a while.

4. Impact or dropping something on the open oven door:

There are times when you are in a hurry and you can’t wait to pull the dish out of the oven. This could result in vessel falls. The fall impact could make the hinges loosen out.

5. Tools needed to replace oven hinges:

It’s not tough to replace your oven hinges. A few basic tools like a screwdriver and wrench are sufficient to remove them. You can do this yourself. It’s easy to remove the doors but fitting the new hinges is where the real skill lies. You need to handle the latches carefully and make sure they are in alignment. It’s better to call professionals for your oven repair Sydney.

Hinge replacement process to repair oven door

As mentioned above, removing the hinges is not too difficult. Fitting the new ones is! Here’s how professionals go about the hinge replacement process step-by-step:

1. Remove the oven door and place it carefully on a flat surface

First, they remove the oven door by opening it all the way and closing it half on the way back. The door is then tilted to take it out completely. It’s carefully placed on the floor afterwards.

2. Unscrew the old hinge and remove it from the oven frame

The latches are then opened and the hinges are unscrewed. A screwdriver comes in handy during this time.

3. Inspect door holes and oven frame holes, clean them if needed

After they remove the old hinges, the pros make a detailed observation to see if they could be salvaged. They clean the frame holes thoroughly and oil them up for free movement.

4. Attach new hinge piece to oven frame, ensuring proper alignment

The new hinge pieces are then unpacked to finish the hinge replacement. But the process isn’t complete without taking the alignment into account. They are attached to the frame and adjusted for the alignment.

5. Attach the other hinge piece to the oven door

The above-mentioned step is repeated again for the other hinge piece. The alignment is checked again and readjusted to get the right fit.

6. Carefully remount the door on the oven frame via a new hinge

Now that the hinges are replaced, it is time to mount the oven door on the hinges. It is done slowly and smoothly. If there’s resistance, the door is removed and adjusted once again.

7. Test the operation of the door several times to verify smooth motion

The replacement is now complete. It’s time to verify if the door operation is smooth. Both the opening and closing movements are done repeatedly to check for flawless motion.

Cost of an Ilve oven hinge replacement

The cost of an Ilve oven door hinge replacement depends on the condition of the door frame and the movement. Generally, the cost is a bare minimum. Taking the price of new hinges and service charge into account, you’ll barely feel a pinch in your pocket. The cost could go up if the door frame is broken due to high impact. You may need a new door frame in this case.

Key Takeaway

It’s time to call the experts if you observe a stiffness in the movement of your oven doors. The door hinges are a crucial component of the oven door frame and the smooth movement depends on its effortless functioning. Get your oven hinges replaced regularly before the cost of oven repair Sydney shoots up.

Leave a reply