Repairing a Heat Pump, Do It Yourself vs. Hiring Cambridge Heating and Cooling



Choose Cambridge Heating and Cooling for Heat Pump Repair Scarborough work may be more expensive, but it may also save you from the inconvenience and any hazards associated with doing it yourself. While most heat pump problems are easily resolved by the average homeowner, others need the skills and expertise of a trained professional.

Heat pumps just move heat from one place to another without consuming any more energy. They neither create new heat nor cool the air. Consequently, they may prove to be more cost-effective substitutes for traditional heating and cooling systems. In contrast, things aren’t always as simple and effective when it comes to heat pump maintenance.

How do you distinguish between problems that you can solve on your own and those that call for a licensed HVAC contractor’s help? Find out more by reading on.

Even though Heat Pump Repairs might be challenging, most common issues can be fixed or avoided completely with some simple troubleshooting and regular maintenance. The list of problems with your heat pump that you may simply fix on your own is as follows:

Excessive noise Since heat pumps are designed to run quietly, you can very well assume that there is a problem with your unit if you hear rattling or a lot of noise coming from it. Most of the time, the noise is caused by moveable parts that have fallen loose, such belts, screws, or bolts. Examine these parts and tighten any screws that need to be adjusted. You should contact Cambridge Heating and Cooling if the noises persist.

An imbalance in the pressure provided to a heat pump is often the cause of its incapacity to produce heating or cooling. Most pumps are equipped with a gauge that allows the pressure to be observed. If the air temperature is too high or too low, changing the air filters may help.

A buildup of dirt in the heat pump’s evaporators and filters is frequently the source of frost formation, which can also result in a frozen heat pump. Simply clear the evaporators of any dust or debris, clean or replace the filters, and then reinstall them. If the pump has a defrost setting, it should be used; otherwise, it should be left to run until the frost has been cleared from the unit before restarting.

Not being able to switch on: Before hiring a professional to fix your heat pump if it isn’t producing any heat at all, you should check the power supply. Doing this straightforward action might save you money and time. You may want to try resetting the power supply before calling an HVAC specialist.
Contacting a team of knowledgeable HVAC specialists is the best course of action if doing these steps does not fix the problems you are having with your pump or if you are unclear of the cause of the issue. Due to the difficulty and potential risk involved, it is not advised for the typical homeowner to try solving problems with the compressor, thermostat, or refrigerant levels on their own. Call Cambridge Heating and Cooling if you’re unsure. They will be able to offer you the knowledgeable direction you need to fix your heat pump without taking any risks.

Leave a reply